Follow us on :

Gaskets & Seals

Compressed Non-Asbestos Gasket Sheets

Entire range of Non-asbestos sheets that cover sereval application's and media's. Sheet are available in different sizes. For example 1.5m x 1.5 m, 1.5m x 2m, 1.5m x 4m, 1.5m x 6 m & in different thicknesses from 0.5 mm to 5 mm. Sheets are available as per customers requirement.

CI 62


Good chemical resistance against water and oil.Resistance to refrigerants.Low gas leakage A good product for wide range of industrial applications

CI 42


Asbestos free gasket material based on Aramid fibre with NBR binder.

CI 18


Asbestos free universal wire insertion gasket material for general application.

Cut Gaskets


Cut gaskets of all shapes and sizes are available. We stocks a wide range of standard pipe flange gaskets to IS, ANSI & DIN standards. These are available in both flat & raised face.

SL-111


Basis:

Chrysotile asbestos fibre, Mineral Fibre and Natural Rubber

General properties and applications :

To seal off water, steam, air and alkaline chemicals for low stress conditions.

Dimensions of standard sheets:

1500 mm X 1500 mm, 1500 mm X 4500 mm, 1500 mm X 1125 mm, 1500 mm X 1000 mm, 1500 mm x 2000 mm,1500 mm X 4000

Thickness:

0.25mm, 0.50mm, 0.75mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm

Finish:

Red

Technical data:

All data are typical values and refer to sheet thickness of 1.5 mm

SL-5000


Basis:

Chrysotile asbestos fibre, Natural Rubber

General properties and applications :

To seal off water, steam, air and alkaline chemicals for low stress conditions.

Dimensions of standard sheets:

1500 mm X 1500 mm, 1500 mm X 4500 mm, 1500 mm X 1125 mm, 1500 mm X 1000 mm, 1500 mm x 2000 mm,1500 mm X 4000

Thickness:

0.25mm, 0.50mm, 0.75mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm

Finish:

Fanta

Technical data:

All data are typical values and refer to sheet thickness of 1.5 mm

SL- It 300


Basis:

Chrysotile asbestos fibre, Styrene Butadiene Rubber

General properties and applications :

To seal off air, water, steam, alkalies & week acids, ammonia, propane producer gas under high stress conditions.

Dimensions of standard sheets:

1500 mm X 1500 mm, 1500 mm X 4500 mm, 1500 mm X 1125 mm, 1500 mm X 1000 mm, 1500 mm x 2000 mm,1500 mm X 4000

Thickness:

0.25mm, 0.50mm, 0.75mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm

Finish:

Grey / Graphited

Technical data:

All data are typical values and refer to sheet thickness of 1.5 mm

SL- Special (Oil)


Basis:

Chrysotile asbestos fibre, Nitrile Butadiene Rubber

General properties and applications :

Suitable for use with internal combustion engines, compressors, chemical plants, etc. This grade also provides effective sealing against hot oils, tar oils and chlorinated & aromatic hydrocarbons under high stress conditions.

Dimensions of standard sheets:

1500 mm X 1500 mm, 1500 mm X 4500 mm, 1500 mm X 1125 mm, 1500 mm X 1000 mm, 1500 mm x 2000 mm,1500 mm X 4000

Thickness:

0.25mm, 0.50mm, 0.75mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm

Finish:

Green

Technical data:

All data are typical values and refer to sheet thickness of 1.5 mm

SL- It 'S' (Acid)


Basis:

Chrysotile asbestos fibre, CSM (highly acid resistance rubber)

General properties and applications :

Recommended for organic and inorganic acids, alkalies, alcohols, esters and ketones.

Dimensions of standard sheets:

1500 mm X 1500 mm, 1500 mm X 4500 mm, 1500 mm X 1125 mm, 1500 mm X 1000 mm, 1500 mm x 2000 mm,1500 mm X 4000

Thickness:

0.25mm, 0.50mm, 0.75mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm

Finish:

White

Technical data:

All data are typical values and refer to sheet thickness of 1.5 mm

Location

PRAKASH MICA EXPORTS PVT. LTD.
Parama Apartment, 3rd Floor
Block - B, 218 Lake Town
Kolkata - 700089
West Bengal, India.

Certification